/*   ==================================================================
     >>>>>>>>>>>>>>>>>>>>>>> COPYRIGHT NOTICE <<<<<<<<<<<<<<<<<<<<<<<<<
     ------------------------------------------------------------------
     Copyright (c) 2006-2018 by Lattice Semiconductor Corporation
     ALL RIGHTS RESERVED
     ------------------------------------------------------------------

    IMPORTANT: THIS FILE IS AUTO-GENERATED BY LATTICE RADIANT Software.

     Permission:

    Lattice grants permission to use this code pursuant to the
    terms of the Lattice Corporation Open Source License Agreement.

     Disclaimer:

    Lattice provides no warranty regarding the use or functionality
    of this code. It is the user's responsibility to verify the
    user Software design for consistency and functionality through
    the use of formal Software validation methods.

     ------------------------------------------------------------------

     Lattice Semiconductor Corporation
     111 SW Fifth Avenue, Suite 700
     Portland, OR 97204
     U.S.A

     Email: techsupport@latticesemi.com
     Web: http://www.latticesemi.com/Home/Support/SubmitSupportTicket.aspx
     ================================================================== */

#ifndef I2C_SLAVE_REGS_H
#define I2C_SLAVE_REGS_H

/*
*  i2c slave register definition
*/

#define I2C_SLAVE_DATA_BUFFER                       (0x00)

#define I2C_SLAVE_ADDR_LOW                          (0x01*4)
#define I2C_SLAVE_ADDR_HIGH                         (0x02*4)

//#define I2C_SLAVE_TIMEOUT_LOW                       (0x03*4)
//#define I2C_SLAVE_TIMEOUT_HIGH                      (0x04*4)

#define I2C_SLAVE_CTRL                              (0x03*4)
//#define I2C_SLAVE_INIT_INTR_EN              (0x80)
//#define I2C_SLAVE_RW_DONE_INT_EN            (0x40)
#define I2C_SLAVE_ACK_CNTRL                 (0x20)
#define I2C_SLAVE_ACK_BUSY                  (0x10)
#define I2C_SLAVE_TIMEOUT_EN                (0x08)
//#define I2C_SLAVE_HS_MODE_EN                (0x04)
#define I2C_SLAVE_RESET			    (0X04)
#define I2C_SLAVE_SCLK_STRERCH_EN           (0x02)
#define I2C_SLAVE_10BIT_ADDR_EN             (0x01)

//#define I2C_SLAVE_BYTE_COUNT                        (0x06*4)

#define I2C_SLAVE_TARGET_BYTE_COUNT               (0x04 * 4)

#define I2C_SLAVE_INT_STATUS                        (0x05*4)
#define I2C_SLAVE_INT_ENABLE                        (0x06*4)
#define I2C_SLAVE_INT_SET                           (0x07*4)


#define I2C_SLAVE_INT_STATUS2                        (0x08*4)
#define I2C_SLAVE_INT_ENABLE2                        (0x09*4)
#define I2C_SLAVE_INT_SET2                           (0x0a*4)
#define I2C_SLAVE_FIFO_STATUS			     (0x0b*4)

#define I2C_SLAVE_RX_FIFO_EMPTY				(0x01)

#define I2C_SLAVE_TR_COMPL	            	(0x80)
#define I2C_SLAVE_STOP_DET                  (0x40)
#define I2C_SLAVE_TX_FIFO_FULL              (0x20)
#define I2C_SLAVE_TX_FIFO_AEMPTY            (0x10)
#define I2C_SLAVE_TX_FIFO_EMPTY             (0x08)
#define I2C_SLAVE_RX_FIFO_FULL              (0x04)
#define I2C_SLAVE_RX_FIFO_AFULL             (0x02)
#define I2C_SLAVE_RX_FIFO_READY             (0x01)

#define I2C_SLAVE_STOP_ERR  				(0x02)
#define I2C_SLAVE_START_ERR					(0x01)

#endif