The Lattice Semiconductor D-PHY Receiver IP converts DSI or CSI-2 data to 8-bit or
16-bit or 32-bit or 64-bit data. The CSI-2/DSI D-PHY Receiver IP is intended
for use in applications that require a D-PHY receiver in the FPGA logic.
LIFCL-40, LIFCL-17, LFD2NX-40, LFD2NX-17, LFCPNX-100
| 1.2.0 |
Added CertusPro-NX support. |
| 1.1.2 |
Updated INIT value of CLK_DESKEW_DLYCAL when data rate is less than or equal to 1.5 Gbps |
| 1.1.1 |
added deskew calibration support. adjusted Soft D-PHY HS-SETTLE parameter count. hid RX_FIFO parameters in the GUI when CIL is enabled. |
| 1.1.0 |
Added support for RX lane = 3 in the Verilog testbench. Fixed hs-settle timing for Soft D-PHY. Fixed ports when LMMI is enabled. Added Certus-NX support. |
1.0.1 | Production release. |
| 1.0.0 | Initial release. |